HF

160 m

1.8–2 MHz

80 m and 75 m

3.5–4 MHz

60 m

5.33–5.407 MHz

Four single-signal channels and one shared 15 kHz segment, with low power limits.

40 m

7–7.3 MHz

30 m

10.1–10.15 MHz

No phone at all, so CW has more room here than on any other HF band.

20 m

14–14.35 MHz

17 m

18.068–18.168 MHz

15 m

21–21.45 MHz

12 m

24.89–24.99 MHz

10 m

28–29.7 MHz

Technicians may use single sideband voice from 28.3 to 28.5 MHz.

VHF and UHF

6 m

50–54 MHz

2 m

144–148 MHz

1.25 m

219–225 MHz

219 to 220 MHz is for fixed digital links only, shared with other services.

70 cm

420–450 MHz

What the classes mean

Technicians get all of VHF and UHF, but on HF only CW in parts of 80, 40 and 15 metres, plus 10 metres. General adds most of HF. Amateur Extra adds the bottom 25 kHz of several bands and the rest of the phone segments.

Where to listen

W1AW, the ARRL’s station in Connecticut, sends code practice at set times on the frequencies marked. The beacon markers on 20 and 10 metres are stations sending their call signs in Morse around the clock, which also shows whether a band is open.

Sources

Privileges and modes are from the FCC rules, 47 CFR 97.301, 97.305 and 97.307, as amended in January 2026, for stations in ITU Region 2. Markers are conventions from the ARRL band plan and W1AW schedule. The 2200 m and 630 m bands and the microwave bands are not shown.

This chart is a learning aid, not legal advice. The FCC rules in 47 CFR Part 97 are the authority and they change, and the chart leaves out power limits, sharing rules and local restrictions. You are responsible for transmitting only within your licence privileges. Omteish makes no guarantee that this chart is complete or current.